Thunder Scientific Corporation - Humidity Generation and Calibration Equipment NVLAP - Code 200582-0

Contact Us:

Toll Free: (800) 872-7728
Phone: (505) 265-8701
FAX: (505) 266-6203

 

E-mail:

sales@thunderscientific.com
support@thunderscientific.com
info@thunderscientific.com


Model ACS-1200 Air Compressor System

Model ACS-1200

Oil-less Compressed Air System

A Fully Enclosed Compressed Air Supply with Dryer & Sound Muffling Cabinet

 

FEATURES

  • 175 psiG Oil-Less Air Supply
  • Dry Air To <-30 °C Ambient Pressure Dew Point
  • Sound level <65 db
  • Vibration Isolated Compressor
  • Membrane Air Dryer
  • 10’ Air Hose Extension
  • On/Off Fuse Switch
  • 8’ Removable AC Power Cord
  • Hour Meter
  • Indoor Use Only
  • Dimensions L 24” x W 14” x H 11.70”
  • Cabinet Weight Approximately 40 Lbs.

DESCRIPTION

The ACS-1200 is designed to be used as the air supply for a Model 1200 Humidity Generator. This is a fully enclosed compressed air supply incorporating a membrane style air dryer in a sound muffling cabinet. This system is ideal for in-lab use because of the low sound level at less than 65 decibels.

 

PRINCIPLE OF OPERATION

To provide the Model 1200 Humidity Generator with a clean, dry air supply and to give the laboratory a noise level that's acceptable for the lab technicians to carry on with their calibrations.

Model ACS-1200 Dimensions
Dimensional Schematic of the ACS-1200 Air Compressor System.

 

 

SPECIFICATIONS

The ACS-1200 is an oil-less air compressor that can produce a pressure of 175 psi, at a maximum ambient air temperature of 30 °C, continuously for up to 5,000 hours before a minor maintenance service kit is required.

 

UTILITIES

The ACS-1200 system is available in ether 100/100-115V~ 50/60Hz, single phase at 1/2 HP and 7.5A or 220-240V~ 50Hz, single phase at 1/3 HP and 5A depending on your needs.

 

ORDERING INFORMATION

When ordering an ACS-1200 air compressor system you will also receive a ten foot air hose extension and an eight foot removable AC power cord. If you already have a Model 1200 Humidity Generator and you only need to order the ACS-1200, specify this part number when ordering. In addition, you will need to specify your power requirements by adding a -R for regular domestic power of 120V, or if high voltage is needed then specify a -H for the 220V unit. If you need to order a compressor only, specify part number GAST110, for the 120VAC model or GAST220 for the 220VAC model.

 

Back to Top

THUNDER SCIENTIFIC CORPORATION

623 WYOMING BLVD. S.E. • ALBUQUERQUE, NM 87123-3198
Toll Free: (800) 872-7728 • Phone: (505) 265-8701 • FAX: (505) 266-6203
E-mail: sales@thunderscientific.com | support@thunderscientific.com | info@thunderscientific.com